Home Training Training Materials Classroom IT Equipment Menu
Classroom IT Equipment Menu Print E-mail
Thursday, 26 March 2009 09:50

Version Date:2008-9

I. Classroom IT Equipments

  1. Computer
  2. Projector
  3. Microphone

II. Before Class Gets Started

Please perform the followings preparations before class gets started:

  1. Power on the projector
    1. Press the RED "POWER" button from the projector remote control to turn on the projector.
    2. A start up logo will appear on the projected screen, the projector is successfully turned on.
    3. If there is no image desplayed on the projected screen, please check the power supply of the projector is working properly.
  2. Power on the computer
    1. Turn on the computer via the "POWER" button.
    2. Both projected screen and computer monitor will display the same image, if the system is successfully boot up.
    3. If there is no displayed on the projected screen, please check the cable connections between projector and computer.
  3. Testing the microphone
    1. Switch the power switch on the Microphone to the ON position.
    2. Test on the microphone volume.
    3. If there is no sound out from the microphone, please check the power of the amplifier and the cable connection from the microphone.
    4. The amplifier is located on the instructor desk or under the desk, or in the wall cabinet near the entrance.

III. After class ends

  1. Projector
    1. Press the RED "POWER" button from the projector remote control.
    2. A message is displayed to prompt user for confirmation.
    3. Press "POWER" again to confirm shut down.
  2. Computers
    In Windows operating system, click on "START" button then select "turn off computer" button.

 

Download: Classroom IT Equipment Menu

教室IT设备使用说明

版本日期:2008-9

I、教室IT设备

  1. 电脑
  2. 投影仪
  3. 麦克风

II、上课前

上课前请作好以下准备:

  1. 开投影机
    1. 投影机遥控器à按"POWER按钮"(红色);
    2. 开启成功: 投影幕上会显示"启动的画面"
    3. 如果没有显示,请检查电源。
  2. 开电脑
    1. 按电脑上的"POWER按钮"
    2. 开启成功: 电脑显示器和投影幕会显示"相同的画面"
    3. 如果没有显示,请检查投影仪和电脑间的接线。
  3. 测试麦克风
    1. 开启功放(若台面有)- 按功放上的"POWER按钮"
    2. 测试麦克风音量及效果
    3. 如果麦克锋没有声音,请检查功放和麦克锋之间的连线。
    4. 功放会放在讲台上或在讲台下面,或门口附近的壁柜。

III、上课后

  1. 关投影机
    1. 遥控器按 "POWER 按钮"(红色);
    2. 投影幕上显示"确认关闭提示";
    3. 再次按"POWER 按钮"确认关闭
  2. 关电脑Computer :在WINDOWS系统- "开始菜单"-"关闭电脑"


IV 重要提示Important Notice

  1. 在开启投影机、电脑和使用MIC前,请先确认供电正常
  2. 电脑系统有自动还原功能,重启电脑后保存在电脑上的文件会自动删除
  3. 请不要对投影机参数进行改动
  4. 请不要移动讲台

Q&A

  1. 供电故障:
    在使用投影机、电脑、麦克风,功放前,请先确认电源正常,若电源有故障,请联系物业解决 (Tel : 3620110)
  2. 文件不能保存于电脑上:
    电脑系统有自动还原功能,重启系统后保存在电脑上的文件会自动删除
  3. 特殊设备或电子教学材料:
    可联系ITSC预约时间进行测试;
    不保证各种未经测试的,或介质损坏、盗版、区域限制等的电子文件和光盘的读取

ITSC服务时间ITSC service time

  • 周一 ~ 周五: 7:30--21:00
    周六: 8:30--17:30;
  • 支持热线: 3620316或3620315.

有关多媒体设备的提示:

  • 教学期内,ITSC每周六对多媒体教室设备进行检查,
  • 根据老师(有特别申请)特别要求,也可对多媒体设备进行个别调试。

 

下载:教室IT设备使用说明

Last Updated on Monday, 11 January 2010 10:56
 
Share To:   转播到腾讯微博